I’d greatly appreciate suggestions for brake rebuild kits, perhaps master & slave cyl., calipers, etc. I’m just starting on a just acquired ‘67 2000TC that was modified with a V8 and 5 speed many years ago. I think the 3-piston front calipers were not original to a TC: any suggested vendors or courses of action? I have a J Taylor manual ordered. I’m in very rural far-northern California. I don’t even know exactly what engine I have yet, but will know soon.
Thanks for any time responding. I welcome any and all direction & input.
Good source for brake bits:P6 3500 mongrel from 2000TC
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 3
- Joined: Tue Sep 24, 2019 12:18 am
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
Re: Good source for brake bits:P6 3500 mongrel from 2000TC
Pay these guys a visit...
http://www.classicroverforum.net/index.php
http://www.classicroverforum.net/index.php
Cheers,
John
John
Re: Good source for brake bits:P6 3500 mongrel from 2000TC
They are most likely calipers from the V8 P6, which IIRC are the same as E-Type jag, but readily available from the Rover specialist suppliers. Rear calipers are the same across all models apart from really early cars with a Dunlop system.P6B Mongrel wrote: ↑Tue Sep 24, 2019 1:18 amI think the 3-piston front calipers were not original to a TC: any suggested vendors or courses of action?
Re: Good source for brake bits:P6 3500 mongrel from 2000TC
This is a useful resource:
http://www.delphicat.com/WebForms/frmDelphiHome.aspx
Have a look around XJ6 -
Tom.
http://www.delphicat.com/WebForms/frmDelphiHome.aspx
Have a look around XJ6 -
Tom.
Dax Rush 4.6 supercharged V8 MSII