SP Retro Show, new PB
Moderator: phpBB2 - Administrators
- topcatcustom
- Forum Contributor
- Posts: 2965
- Joined: Sat Aug 09, 2008 11:53 am
- Location: Essex
- Contact:
SP Retro Show, new PB
First time ran at the Pod, the surface is just incredible and don't mind paying £25 to use it one bit! Ran a 13.4 at 113 on first run, slower on second due to blowing a head gasket but never mind- still happy
TC
I've just asked Ferriday for a price on copper gaskets. Looks like the may be 200 notes each ???
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
Perry,
nice bit of soft bit of copper hot watertank (used, so it has enealed at 85deg C for 20 years) and a set of leather punches and a piece of MDF then I'll lend you my trapanning tool (£7 from the local hardware shop) and a couple of evenings work, jod done, or better still get RalphH to run a couple up on his waterjet.
Best regards
Mike
nice bit of soft bit of copper hot watertank (used, so it has enealed at 85deg C for 20 years) and a set of leather punches and a piece of MDF then I'll lend you my trapanning tool (£7 from the local hardware shop) and a couple of evenings work, jod done, or better still get RalphH to run a couple up on his waterjet.
Best regards
Mike
poppet valves rule!