hi guys heres our mini van with a 3.9 v8 stage 3 heads and a 500 cfm edelbrock on her, took roughly 7months to build and had its first run down santa pod sunday at the mini show to test it,
v8 mini clubman van
Moderator: phpBB2 - Administrators
-
- Getting There
- Posts: 257
- Joined: Fri Jun 04, 2010 8:22 am
audi 5cyl ally rad half the size of yours and keeps my 4.6 well coolv8mini1 wrote:well those pesky v8's are hard to keep kool lol
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
Hi,
Great stuff, Another V8 in a mini.
I have used a standard SD1 size rad with twin cooling fans with no issues, got 65mm wide radiator in now , same frontal area size.Went bigger with getting the supercharger , so it will always keep it cool , even in traffic.
How did you go at santa pod?, was at show in my daily, its not the same
What set up are you using for the Suspension , axle , etc
regards
Andy
Great stuff, Another V8 in a mini.
I have used a standard SD1 size rad with twin cooling fans with no issues, got 65mm wide radiator in now , same frontal area size.Went bigger with getting the supercharger , so it will always keep it cool , even in traffic.
How did you go at santa pod?, was at show in my daily, its not the same
What set up are you using for the Suspension , axle , etc
regards
Andy
3.9 V8 Mini Van....THE BEAST