test bed
Moderator: phpBB2 - Administrators
Re: test bed
More info needed - carbs, fuel injection?, points, ignition amplifier?
Chris.
Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Re: test bed
It’s just bog standard carb and points dizzy set up , no fuel injection , nothing fancy,
Re: test bed
That's dead easy!, you just need to wire the coil to the distributor as per the factory wiring diagram, then put a +12V supply on the coil positive terminal.
Ensure fuel supply (power to electric pump).
Crank the engine, and away you go!
To stop it, remove the +12V from coil positive.
DON'T FORGET AN EARTH CONNECTION FROM ENGINE BACK TO BATTERY NEGATIVE TERMINAL.
Chris.
Ensure fuel supply (power to electric pump).
Crank the engine, and away you go!
To stop it, remove the +12V from coil positive.
DON'T FORGET AN EARTH CONNECTION FROM ENGINE BACK TO BATTERY NEGATIVE TERMINAL.
Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Re: test bed
many thanks , will give it a go , just finishing fabrication at moment.