Recomendations For Engine Block Work

Post by **Coops** » Sun Sep 06, 2015 4:42 pm

After some recommendations for companies regarding block work local to Berkshire if possible,

Need block faces skimmed where liners sunk,
slight rebore to take new pistons,
offset grind my crank,
balance the whole assembly.

v8250 · Post by **v8250** » Sun Sep 06, 2015 5:20 pm

Have you tried James Goldstraw at Grace Engineering in Newbury? Call on 07779.223001. If good for you, say Andrew forwarded contact details.

Note: if urgently required do be careful as they're constantly flat out - they do need pinning down on completion date...but no different to most engineering houses.

Also, FJ Payne in near Witney...a little further but also very good.

Post by **Coops** » Sun Sep 06, 2015 5:23 pm

thankyou.

stevieturbo · Post by **stevieturbo** » Sun Sep 06, 2015 9:30 pm

You could try Roland Alsop, ask for Steve

http://ukplaces.com/Engine%20Rebuilders ... nd-l-alsop

Bit further away, but Chesman engineering usually got a good rep too ?

Post by **Coops** » Sun Sep 06, 2015 9:32 pm

yeah was looking towards chesmans funny enough,
need to get this engine block sorted,