My TVR story

What Do You Drive? Tell Us Here.
V8 Only Please,

Moderator: phpBB2 - Administrators

sidecar
Top Dog
Top Dog
Posts: 2399
Joined: Sun Feb 04, 2007 9:52 pm

Post by sidecar »

mgbv8 wrote:



Pete!
The free flow of your pump is not what you need to measure for accurate testing.
Your 3 litres per minute is enough to run about 500hp. But you need to know what the pump will deliver with the resistance of the fuel system taken into account ?
I use a simple, but very crude method of doing this. And its not going to be a fave with the HSE guys :D
I'll come back to that via pm if you want more info !!
Are you happy that your pressure switch works at the set value?? Have you tested it ??
The MSD Blaster coils are good value items that deliver a good punchy spark for not a lot of money. I will leave it to the RV 8 experts on here to say if your module will trigger this ok. I assume it will though :)

You will only crack pistons if you run too much gas with too much advance. What is your RV8 engine size??

The nitrous bottles get fairly warm to the touch at 900 psi... And when doing as quick warm up with my (other method of warming the bottle) they can creep to 1200 psi quickly when full :)

My MGB GT does not have a lot of weight over the rear end. So I use slicks to get my traction. What car do you drive, and what rear tyres do you have??

And do you have LSD or a diff locker of some sort??

Perry

Hi Perry,

You are right in that free flow is not the best test. My NOS book explains how to do a test at WOT using the fuel solenoid and a bottle. Having said that I fitted a pump that is so OTT I'm sure that it will be OK. The Edelbrock gumph does give the figures for flow at 7.5 PSI somewhere or other. The other thing is my AFR shows that the setup is too rich at the moment anyway. (Well is was with 45/47 jets).

I set the adjustable low pressure switch myself using a fluke meter and a pressure gauge, I'm sure that its OK.

If you reckon that a blaster coil is will make a difference I'll look into getting one. I'm going to buy another dizzy and make a retard unit that kicks in with the NOS.

My engine is a 4.6, it puts out 285 BHP at the fly without NOS. I guess 350 BHP with the NOS would keep me happy!

The car is a Cobra replica, it runs a Ford 3.36:1 LSD diff and 17" wheels. The tyres are Goodyear Eagle 235's. The box is an R380. (First gear is useless even though the box came from a Morgan or something similar so it does not have the mega low first gear).

The car is just used for high days and holidays on the road. I spent half my life racing F1 sidecars, I just need something to get me into the garage now but without the pressure!

I'm keen to learn about your heater system, I'll PM you!

I think that I might have hijacked this thread!

Once again thanks for your help!

Cheers,

Pete



User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

Update....

Image

Image

Image

Image
10.612 @ 129.77
176.5 standing mile.

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

Its in and getting shinier! :D

Image

Image

Image
10.612 @ 129.77
176.5 standing mile.

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

Trial body fit to run some checks. Also wiped down with a damp rag. 18 months in a dusty garage/ workshop had took its toll :rolleyes:

Image

Image

Image
10.612 @ 129.77
176.5 standing mile.

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

99%

Image
10.612 @ 129.77
176.5 standing mile.

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5041
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

dbv8 wrote:99%
Is that the 99% that takes 20% of the overall time?!!

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

ChrisJC wrote:
dbv8 wrote:99%
Is that the 99% that takes 20% of the overall time?!!

Chris.
I sure hope not because that would mean i have another 6 years to go!
I am hoping to reach a point this weekend where i can turn the key, sort out the electrical gremlins, panic, put the fire out, fix the leaks, start it again and finally bed the cam in. :lol:
10.612 @ 129.77
176.5 standing mile.

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

That exhaust system looks so cool mate :)

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

mgbv8 wrote:That exhaust system looks so cool mate :)
The shiny y piece is a 'CliveF' decat pipe. I already removed the precats from the manifolds as these were only in for euro legislation.
The ehxaust then runs through a straight through box mid way but i also cut this open and half sleeved the baffles.
Its going to be quite loud.
Not drag strip loud but rather loud for the road. :twisted:

I (or a mate) will be filming the fire up so i will post it asap
10.612 @ 129.77
176.5 standing mile.

kiwicar
Forum Contributor
Forum Contributor
Posts: 5461
Joined: Sat Nov 18, 2006 5:00 pm
Location: Milton Keynes

Post by kiwicar »

Hi
Just after that "y" piece arn't you missing something?





Like



A thunking great turbo?? :chase



Best regards
Mike
poppet valves rule!

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

Well funny you ask.
The engines built with forged pistons, a tight squish, fully ported big valve heads, an 8:1 compression ratio and a bespoke nitrous friendly solid cam.

I am running EFI as was for now but will be building to a 250 shot of nitrous over this year.

Next year could see the turbo (or 2) added.
10.612 @ 129.77
176.5 standing mile.

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

99.5% done.
I should be firing it up this Friday.

Image

Image

Image
10.612 @ 129.77
176.5 standing mile.

User avatar
dbv8
Knows His Stuff
Knows His Stuff
Posts: 477
Joined: Mon Jul 21, 2008 11:40 am
Location: Barrow-in-Furness

Post by dbv8 »

First fire up in 18 months bedding the cam in.
Needs a tune up asap

10.612 @ 129.77
176.5 standing mile.

Post Reply

Return to “Your Cars”