Evening all,as my eaton blower is going to be blowing into rv8 plenum(lowered)do you still need the trumpets or can i just machine some nice bells into where trumpets were,does that make sense?
nigel
plenum
Moderator: phpBB2 - Administrators
Hi
have a read here
http://www.v8forum.co.uk/forum/viewtopic.php?t=9749
not sure what you will gain height wise if that is your aim but plenum roof height to inlet tract end is a dimension that effects the shape of the torque curve (but not much on an engine with power output of the rover). Quite honestly compared to the addition of the turbo anything else is just painting the wheels.
best regards
Mike
have a read here
http://www.v8forum.co.uk/forum/viewtopic.php?t=9749
not sure what you will gain height wise if that is your aim but plenum roof height to inlet tract end is a dimension that effects the shape of the torque curve (but not much on an engine with power output of the rover). Quite honestly compared to the addition of the turbo anything else is just painting the wheels.
best regards
Mike
poppet valves rule!