Head Gasket Sizes

Post by **Coops** » Sat Jan 06, 2007 10:20 pm

What size gasket would i use on a 95mm bore? the 3.9/4.6 94mm bore ones or is there a 95mm composite gasket?

john 215 · Post by **john 215** » Sun Jan 07, 2007 11:59 am

Hi,V8 Developments list a 95mm head gasket on there site.
Hope this helps,John

Wotland · Post by **Wotland** » Sun Jan 07, 2007 12:34 pm

Hi,
You can use Buick 300 head gaskets

who has 3.75'' bore size.
Cheer.

stevieturbo · Post by **stevieturbo** » Sun Jan 07, 2007 8:10 pm

Wouldnt the standard gasket still suffice ????

The factory/Payen ones are excellent gaskets.

Post by **Coops** » Sun Jan 07, 2007 9:17 pm

was asking stevie as didnt want to have sealing issues if i used the 94mm 3.9 head gaskets

toughy V8 · Post by **toughy V8** » Sun Jan 07, 2007 9:21 pm

but isnt the standard 3.9 gasket actually 95mm?

stevieturbo · Post by **stevieturbo** » Sun Jan 07, 2007 9:23 pm

thev8kid wrote:was asking stevie as didnt want to have sealing issues if i used the 94mm 3.9 head gaskets

How do they look on the block ?? are they overlapping the bore badly ?

Post by **Coops** » Sun Jan 07, 2007 9:31 pm

won't know till tuesday mate when i pick the two blocks up