su carb outlets
Moderator: phpBB2 - Administrators
su carb outlets
need help with outlets on twin carbs was maybe hoping someone has a diagram to point out what outlet goes where?
Hi
Big one (1 3/4 inches in diamiter) goes on the manifold, toward the engine
The one behind the piston (about 1/4") diamiter is attached to the sump evacuation set up.
There are two leading to/mounted on the float bowl (not sure if this is an HIF carb) one is fuel in and has the needle valve controlling it's flow the other one is the overflow and you just stick a piece of pipe on it that points at the ground.
The little one about 1/16" diamiter hole goes to the distributor vac advance can
Best regrads
Mike
Big one (1 3/4 inches in diamiter) goes on the manifold, toward the engine
The one behind the piston (about 1/4") diamiter is attached to the sump evacuation set up.
There are two leading to/mounted on the float bowl (not sure if this is an HIF carb) one is fuel in and has the needle valve controlling it's flow the other one is the overflow and you just stick a piece of pipe on it that points at the ground.
The little one about 1/16" diamiter hole goes to the distributor vac advance can
Best regrads
Mike
poppet valves rule!
