Rover V8 Breathing

General Chat About Engine Build

Moderator: phpBB2 - Administrators

garrycol
Knows His Stuff
Knows His Stuff
Posts: 527
Joined: Thu Jul 16, 2015 2:47 pm
Location: Australia

Re: Rover V8 Breathing

Post by garrycol »

Yes 1 is described by Chris - in my 3.5 it goes to the heater tank of the radiator - it bleeds air out of the cooling system.

On my engine (3.5 in a FC 101) Number 2 is the vacuum port for the brakes and Number 3 is the vacuum port for the center diff lock. These are manifold vacuum so are interchangeable so work as Chris describes.

Ported vacuum for things like distributor etc comes from outlets in the the carb base.



marsbar
Newbie
Newbie
Posts: 16
Joined: Mon Sep 05, 2022 5:02 pm

Re: Rover V8 Breathing

Post by marsbar »

Thanks Garry
Currently building AK Cobra kit car with 3.5 V8 engine (also rebuilding this at the same time!)

User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5040
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Re: Rover V8 Breathing

Post by ChrisJC »

I have had a manifold in the past where that little bleed pipe was rusted completely solid, so I didn't connect it! Not very advisable.

Yeah as Garry says, distributor vac comes from the carb. This is because it comes from right by the throttle plate, and is more subtle than just manifold vacuum.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

Post Reply

Return to “Engines Area”