Hello all,
For my London taxi V8 project, we are going to drive the alternator from the crankshaft pulley. It’s a Lucas a127 alternator I believe and it has a 10mm V belt pulley, about 65mm in diameter with a 15mm bore. As the crankshaft and water pump pulleys take 13mm belts, I thought it would be a simple case of looking online for a 13mm pulley to go on the alternator but after a day of looking, I can’t seem to find any that are suitable this side of the Atlantic.
Does anyone know where I might be able to get hold of a pulley that can take a 13mm wide belt with a 15mm bore?
The only ones I’ve seen have large bosses on that would make it stick too far out.
Many thanks in advance...
Alternator pulley sizes
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 11
- Joined: Sun Jun 07, 2020 8:42 am
- ged
- Forum Contributor
- Posts: 668
- Joined: Tue Feb 10, 2009 2:09 pm
- Location: North Wales via NZ
- Contact:
Re: Alternator pulley sizes
Hi Eric,
I make all types of pulleys for the Rover V8. Is it 19/32 bore (15.08mm) with a 1/8" (3.17mm) keyway?
Please look at my website. https://geds-shed.co.uk/
If interested drop me an email.
Best Regards
Ged.
I make all types of pulleys for the Rover V8. Is it 19/32 bore (15.08mm) with a 1/8" (3.17mm) keyway?
Please look at my website. https://geds-shed.co.uk/
If interested drop me an email.
Best Regards
Ged.
Re: Alternator pulley sizes
Ged is a really good guy who’s made stuff for me,
I can’t recommend him enough
I can’t recommend him enough
Re: Alternator pulley sizes
Ged has also made stuff for me in the past and highly recomend him too,
P.S may need a set of 8 - 10 rib serp pulleys making GED if i suffer anymore belt slip with the charger
P.S may need a set of 8 - 10 rib serp pulleys making GED if i suffer anymore belt slip with the charger
Regards Tony C (COOPS)
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts.
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk
-
- Newbie
- Posts: 11
- Joined: Sun Jun 07, 2020 8:42 am
Re: Alternator pulley sizes
Many thanks everyone. The workshop finally managed to find one in their parts bin Friday but thanks for the replies.
1997 London Taxi 3.9l sleeper with SU carbs. Where to guv?