distributer

daz 104 · Post by **daz 104** » Wed Mar 20, 2013 5:14 pm

any one no which way the wires go on coil from dissy . did have a white one and a black and white one . but where it goes on plugs its differnt colours

ChrisJC · Post by **ChrisJC** » Wed Mar 20, 2013 7:51 pm

This is one of the many setups:

Chris.

daz 104 · Post by **daz 104** » Wed Mar 20, 2013 9:49 pm

great that you .

just realised mine as 3 in a row plug has 2 wires

ramon alban · Post by **ramon alban** » Thu Mar 21, 2013 11:06 am

Hello Daz, Your amplifier, would normally have 5 connections.

Two go inside the distributor to connect to the pickup coil

One is the earth via the bolt holes into the body of the distributor.

The White/Black wire goes to Coil Negative.

The White wire picks up its 12 volt supply from the ignition switch via coil positive.

You may, at some time, wish to study the typical V8 electronic ignition system written in laymans terms for the home enthusiast?

http://www.vintagemodelairplane.com/pag ... ion04.html

http://www.vintagemodelairplane.com/pag ... ion05.html

Hope this help? Good Luck!

daz 104 · Post by **daz 104** » Thu Mar 21, 2013 12:26 pm

thank you thats great .

i didnt want to get it wronge way and kill it lol