Saw this on ebay http://www.ebay.co.uk/itm/Auto-Marine-T ... 3089507265
and wondered if it would be okay for the alternator? 2 prongs on back, 65amp output.
Yes or no question..............hopefully
Moderator: phpBB2 - Administrators
-
- Getting There
- Posts: 180
- Joined: Thu Jun 09, 2011 7:03 pm
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
It says 50 amps
Any more than that and it will get hot
That said my understanding is that you could run two strands
Ian
Any more than that and it will get hot
That said my understanding is that you could run two strands
Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
-
- Getting There
- Posts: 180
- Joined: Thu Jun 09, 2011 7:03 pm
I will be running 2 from the alternator, as I understand that is how it's supposed to be done but needed a 2nd opinion to be sure. Rather go a bit too big than not big enough and I may put a different alternator on at a later date and don't want to be re-wiring.Ian Anderson wrote:It says 50 amps
Any more than that and it will get hot
That said my understanding is that you could run two strands
Ian