desperate help please. sherpa remote fitting

[ever88]

looking to fit tly converted lthe short sherpa remote to my recently converted 5 speed lt77 gear box.

I'm uncertain how to connect the bottom of gear lever rod to the gearbox selector shaft.

the hole for gear box selector shaft is a smaller diameter than the bottom of the gear selector rod lever.

is there something that goes between, do i drill the gearbox shaft hole bigger.

desperate help required as looking to have it ready for drag meet this weekend. any other nuances would be appreciated.

i.e. are there any set up issues for selecting gears?

many thanks to all helpers

paul

[/i]

[gelmonkey]

Hi Paul
There is a drop link that attaches to the back of the selector rod and drops down to underneath the gear lever
It has either a nylon or bronze bushing in ti so that it can pivot as you change gear
Should be available from Rimmer Bros or somewhere like that.

Cheers
P