![Image](http://i1072.photobucket.com/albums/w364/simon-m16p6/P6%20project%20X/100_6794_zpsf27d6343.jpg)
I have had to cut the wheel bearings off to get the hubs off of the driveshafts in a press so that they can be modified for the larger Rover pcd. I need to order some replacement bearings in the next few days, and I've read there is a set endfloat on the shafts. I noticed one of the shafts could be pulled in and out by approx 1/8" before they were removed.
My first question is does anyone know what the endfloat is and how best to set it? I could buy a manual, but thought I'd ask here first. Secondly, I've read that the Jaguar Powerlock unit should fit into the Scimitar axle, but there is a difference in the centre because the shafts push in against the diff pins to the open diff, does anyone know any more about that?