Search found 153 matches
- Sat Dec 10, 2016 8:41 am
- Forum: Drivetrain & Transmission Area
- Topic: 10 spline clutch
- Replies: 26
- Views: 10454
Thank you for taking the time to help Mike, and Stevie, I will have to get measuring, my garage is ten miles away from my house towards central London so I cant just pop out there ! I turned down my Cossie front bearing carrier to fit the TVR bell housing, so I will do the same on the Mustang one ra...
- Thu Dec 08, 2016 9:08 pm
- Forum: Drivetrain & Transmission Area
- Topic: 10 spline clutch
- Replies: 26
- Views: 10454
Cheers, I have been trying to sort things out, AP don't list that clutch plate so ive Emailed them, I will have to measure my bellhousing hole for the bearing carrier fit, I had to machine the Cossie one to fit, I cant find any tech info on the net ( PDF OR DRAWING ) regarding the size of the T5 bea...
- Thu Dec 08, 2016 5:15 pm
- Forum: Drivetrain & Transmission Area
- Topic: 10 spline clutch
- Replies: 26
- Views: 10454
Fantastic, thanks for that Mike, I pulled the Cossie box today and its fooked, the main shaft has gone where the needle rollers from the first motion shaft are. I have already machined my SD1 clutch carrier to fit the Cossie box, and I also have a TVR one that's a lot bigger, I will have a measure u...
- Wed Dec 07, 2016 5:31 pm
- Forum: Drivetrain & Transmission Area
- Topic: 10 spline clutch
- Replies: 26
- Views: 10454
10 spline clutch
In case my T5 Cossie box is not worth repairing, (see rebuild thread) I am looking at whats needed if I buy a new aftermarket box, I will have to alter the gearbox mount, the prop yoke, and get a 10 spline clutch, I see that some 10 spine plates for Land Rover are available (link below) my question ...
- Wed Dec 07, 2016 5:19 pm
- Forum: Drivetrain & Transmission Area
- Topic: T5 rebuild Kit
- Replies: 7
- Views: 3801
Is it apart yet ? Does he even know which parts it needs ? Might not even need half of the kit ? We have rebuilt my friends gearbox, it was in good condition, we replaced everything anyhow, as he had the full kit, I have hurt my back so cant pull mine at the moment to see what its like, have since ...
- Tue Nov 29, 2016 8:02 pm
- Forum: Drivetrain & Transmission Area
- Topic: T5 rebuild Kit
- Replies: 7
- Views: 3801
I have contacted him, it works out at £624, and that's just for bearings seals and labour. Surely he will sell you parts ? or Gears ? http://www.gears.tv/products.html Thanks for that, didn't find them when searching, have emailed to see if they do a kit, the one burtons sell and the USA ones are a...
- Tue Nov 22, 2016 1:06 pm
- Forum: Drivetrain & Transmission Area
- Topic: T5 rebuild Kit
- Replies: 7
- Views: 3801
- Mon Nov 21, 2016 5:42 pm
- Forum: Drivetrain & Transmission Area
- Topic: T5 rebuild Kit
- Replies: 7
- Views: 3801
T5 rebuild Kit
Does anyone know if a Ford rebuild kit M-7000-A fits the Cosworth T5 box ?
I know Burton does a kit, but its a 12 week wait, I cant find more suppliers in the UK.
I know Burton does a kit, but its a 12 week wait, I cant find more suppliers in the UK.
- Tue Oct 11, 2016 4:52 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Rover V8 exhaust manifolds
- Replies: 1
- Views: 1567
Rover V8 exhaust manifolds
Has anyone any info about these on ebay, made and shipped from china !
http://www.ebay.co.uk/itm/Highly-Recomm ... SwknJXxqGb
http://www.ebay.co.uk/itm/Highly-Recomm ... SwknJXxqGb
- Thu Sep 15, 2016 4:56 pm
- Forum: Drivetrain & Transmission Area
- Topic: Flywheel, Rear Crankshaft Seal & Bearing
- Replies: 6
- Views: 3619
- Thu Sep 15, 2016 4:45 pm
- Forum: Engines Area
- Topic: 3.9 RV8 oil capacity ?
- Replies: 9
- Views: 5665
- Thu Sep 08, 2016 3:35 pm
- Forum: Engines Area
- Topic: 3.9 RV8 oil capacity ?
- Replies: 9
- Views: 5665
3.9 RV8 oil capacity ?
I have my new 4.6 RV8 engine, with a 3.9 sump and a 3.5 dipstick ! I need to know the exact oil capacity of a 3.9 so I can see where I am at, I have looked all over the web with different results, if someone replies from the USA or whatever their measurements are different to the UK which is even mo...
- Mon Jun 06, 2016 4:19 pm
- Forum: Cooling Area
- Topic: What Antifreeze again !
- Replies: 1
- Views: 2395
What Antifreeze again !
I posted a topic a while back about this, after having trouble with blue antifreeze in my RV8, I was talking to an old friend at a car show yesterday and he told me about Fernox Alphi 11, its a central heating antifreeze that a lot of the classic owners are using after having trouble with even blue ...
- Thu May 26, 2016 4:55 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Fuel pipe
- Replies: 8
- Views: 3931
Goodyear R9 EFI fuel hose will be over spec for you Dave its not cheap mind, future proof for the increased ethanol content that lesser rated fuel hose wont tolerate (well for long) anymore http://www.flexiducting.co.uk/products/goodyear-r9-fuel-hose/ just ordered some of this for a customers car, ...
- Tue May 24, 2016 5:08 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Fuel pipe
- Replies: 8
- Views: 3931