The V8 Owners Forum -

I know this is a old post now but have fitted this to my landy it does run smoother however the timing is 15 to 20 degrees advance IS THIS RIGHT so much so that it's off the crank shaft scale forgot to say it is running on LPG to put it another way if the no1 plug lead was about 20 past the hour on...

I know this is a old post now but have fitted this to my landy it does run smoother however the timing is 15 to 20 degrees advance IS THIS RIGHT so much so that it's off the crank shaft scale forgot to say it is running on LPG to put it another way if the no1 plug lead was about 20 past the hour on...

I know this is a old post now but have fitted this to my landy it does run smoother however the timing is 15 to 20 degrees advance IS THIS RIGHT so much so that it's off the crank shaft scale

hi all i have a rover v8 on su carbs 3.5cc i also have a full LPG kit to install from tingley tech via ebay The said kit is all complete but the fitting instructions have got damp I did ring the good old TINGLEY TECH who was no help So i need a good web site with pictures showing fitting to a carb'e...

Hi all hope this is in right index I have landrover 1987 V8 twin su It starts fine but when driving it stalls as i change gear has been running very very rich as 50 quid petrol got me about 20 - 25 miles on A roads Yes i have been messing with timing & mixture. it will now accelerate great is going ...

More help please>> Removed the dizzy to gain access to oil pump gear, now engine will not tick over with out choke?? have set timing with gun & noted that in order for engine to run the dizzy has to be moved anticlock before mark i made on timing cover. Does rev well/ drive ok but will not tick ove...

More help please>> Removed the dizzy to gain access to oil pump gear, now engine will not tick over with out choke?? have set timing with gun & noted that in order for engine to run the dizzy has to be moved anticlock before mark i made on timing cover. Does rev well/ drive ok but will not tick over...

have 1987 3.5 in landrover which has 3 pipes on each bank coming from the head to a y pipe & connecting into air intake pipe from filter apart from getting in the way when replacing the plugs what are they used for & do i need to keep them for the mot. has been said by some landrover lads to take of...

thanks lad's
that was a fast reply
will do as soon as

hello hello hello any one know about rover v8 1987 carb 3.5 in a a landrover, oil pump/gears as just replaced pump cover with moded 1 & a geared wheel feel out as i took off old cover. Fitted said wheel with new pump cover & now no oil is being pumped around engine do's it need priming?? if so how t...

need help on how to make or plans on engine mounts on a landrover v8 defender engine into a series3 1971 landrover YES it is a new chassis