Search found 361 matches
- Tue Oct 18, 2016 9:00 pm
- Forum: Your Garage Scene
- Topic: My V8 Sierra project ..... maybe I will finish this one !
- Replies: 187
- Views: 171743
- Wed Sep 14, 2016 9:05 pm
- Forum: Engines Area
- Topic: More general questions....Gaskets, breathers, other stuff
- Replies: 9
- Views: 4145
- Mon Sep 05, 2016 7:55 pm
- Forum: Engines Area
- Topic: Todays silly questions - and lots of them! Block info!
- Replies: 34
- Views: 12052
I think the sump in the photo is a bit deep for a Westfield. I thought the recommended was an SD1 sump.
A few have gone with the flat/shallow sump that I think John Eales makes/made. Take a look at Graham Smith's website: http://www.seight.net/sump.htm
A few have gone with the flat/shallow sump that I think John Eales makes/made. Take a look at Graham Smith's website: http://www.seight.net/sump.htm
- Mon Sep 05, 2016 7:18 pm
- Forum: Drivetrain & Transmission Area
- Topic: concentric release bearings
- Replies: 6
- Views: 3650
- Mon Sep 05, 2016 2:57 pm
- Forum: Drivetrain & Transmission Area
- Topic: concentric release bearings
- Replies: 6
- Views: 3650
For what it's worth i'm using: CP2394-14 + CP2346-4 cover/plate CP3859-54 slave Cover looked like this when i got it: http://thumbsnap.com/t/PuyM2Nqx.jpg Which needs a flat bearing. I had the centre 'boss' removed so i just have straight fingers now on the cover and therefore can use a round bearing...
- Mon Sep 05, 2016 12:29 pm
- Forum: Drivetrain & Transmission Area
- Topic: concentric release bearings
- Replies: 6
- Views: 3650
- Sun Jul 31, 2016 8:40 pm
- Forum: Cooling Area
- Topic: straight thermostat housing
- Replies: 3
- Views: 3263
- Tue Jul 26, 2016 6:45 pm
- Forum: Drivetrain & Transmission Area
- Topic: T5 reverse
- Replies: 7
- Views: 4223
- Wed Jul 06, 2016 7:56 pm
- Forum: Engines Area
- Topic: 3.9 Interim timing cover oil cooler delete bung plug size
- Replies: 2
- Views: 2000
- Wed Jun 08, 2016 8:53 pm
- Forum: Engines Area
- Topic: Serpentine crankshaft pulley.
- Replies: 10
- Views: 4920
- Mon Jun 06, 2016 9:14 pm
- Forum: Drivetrain & Transmission Area
- Topic: AP hydraulic concentric slave bearing
- Replies: 9
- Views: 5030
- Tue May 31, 2016 5:19 pm
- Forum: Drivetrain & Transmission Area
- Topic: clutch questions
- Replies: 11
- Views: 5367
- Mon May 23, 2016 6:19 pm
- Forum: Drivetrain & Transmission Area
- Topic: AP hydraulic concentric slave bearing
- Replies: 9
- Views: 5030
- Fri May 20, 2016 6:35 pm
- Forum: Drivetrain & Transmission Area
- Topic: AP hydraulic concentric slave bearing
- Replies: 9
- Views: 5030
I used a cp3859-54 on mine so very similar. Yes bleed nipple on end of hose, I got Earls to make up a hose for me with a bleed on the end. Don't forget the bleed port on the slave is the one that sits highest when installed or it is with mine. Edit: Here is my original Saab slave (pile of crap): htt...
- Thu Apr 21, 2016 6:30 pm
- Forum: Your Car Video's
- Topic: In car Fastest NA RV8 TVR
- Replies: 3
- Views: 5321