Search found 4316 matches
- Wed Dec 27, 2006 9:14 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
The Twisted-sanity controller gave up during todays tests. The thing is all over the place. sometimes it runs to full power ok, then it will re-set to start power during a run or it goes to full power then freezes with all the led's on except the first 3?? I have had good service from this unit for ...
- Sun Dec 24, 2006 6:26 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Basic head rebuild on a budget
- Replies: 10
- Views: 5762
- Sun Dec 24, 2006 6:23 pm
- Forum: General Chat Area
- Topic: HAPPY CHRISTMAS!
- Replies: 14
- Views: 6271
- Sat Dec 23, 2006 10:39 pm
- Forum: General Chat Area
- Topic: HAPPY CHRISTMAS!
- Replies: 14
- Views: 6271
- Sat Dec 23, 2006 10:36 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
Developed a problem with the new setup. Always in 3rd (which is top gear for me) at around 5300 rpm. Took two bottles of gas to find that the controller is resetting itself to start value for some reason? Did two test runs today and 1st one failed, 2nd run went all the way. Looks like I may have som...
- Fri Dec 22, 2006 10:32 pm
- Forum: Cooling Area
- Topic: Problems with water system
- Replies: 13
- Views: 9605
- Fri Dec 15, 2006 10:38 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Weber tuneup recommendations
- Replies: 28
- Views: 13397
- Fri Dec 15, 2006 10:34 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Weber tuneup recommendations
- Replies: 28
- Views: 13397
Tetlow I'm not far away in Buckingham. Marlin motors in Bletchley are quite good for Dyno testing. If you have the 1404 Weber/Edelbrock set up the the 3500 you will probably have .086 main jets and 065x52 rods fitted. These are the stock setup. I assume you got the manual with the carb ? You might f...
- Mon Dec 11, 2006 11:52 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
- Mon Dec 11, 2006 11:30 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
- Mon Dec 11, 2006 7:29 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
- Sun Dec 10, 2006 7:47 pm
- Forum: Your Cars
- Topic: Mk1 Escort
- Replies: 26
- Views: 24230
- Sun Dec 10, 2006 6:58 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
Tony I've seen you run at the Pod many times, but have never managed to say hello. You know what its like when the queue is big. I must try to meet you in 2007. I'm gagging to have a look around that Capri of yours. Looks like a very nice motor. I'm tempted to have another one. Used to have a 3000 G...
- Sun Dec 10, 2006 6:51 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
Hi Lewis Pre SD1 RV8 3500 with a Typhoon cam and Rhoades lifters. Stage 2 3500 heads with standard size valves + a full balance of the bits by Real Steel before I put it all back together. 3 speed auto tranny and all the rest is standard MGB drive train apart from a Phantom grip diff locker. I took ...
- Sat Dec 09, 2006 6:34 pm
- Forum: Nitrous Oxide Area
- Topic: OK I'm convinced !!
- Replies: 19
- Views: 16796
OK I'm convinced !!
That Trevor Langfields WON pulsoids are far superior to the Holley / Generic ones when used with a pulse controller. I've been doing some testing today, and the delivery is very smooth and not at all jerky like the old one's I was using. It took a little while to get used to the lack of kick in the ...