Search found 36 matches
- Thu Jun 21, 2018 9:32 pm
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
Re: 4ha reliant scimitar axle
Must admit to surprise the P6S four speed handles the torque from a 4.6. I managed to break a few with a 3.5. :D Is it not possible to fit the 5 speed SD1 box? That is direct in 4th and has an overdrive 5th. So would reduce the revs with the same axle. Hi Dave Yes it cope well but I'm sure it's my ...
- Thu Jun 21, 2018 9:28 pm
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
Re: 4ha reliant scimitar axle
Ok thanks for looking I've found a company that makes new ones I will wait for your reply before I ring them , I will need a new bearing I've been told that they are very expensive, are they anything special or can I take my old one out and take it to my local bearing shop ? We have a few good one i...
- Sun Jun 17, 2018 11:13 am
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
Re: 4ha reliant scimitar axle
Hi guys update time I've put the 4ha axle from a reliant scimiter with the 3.3 ratio it's better but not right I need to go lower I will try a 3.08 next , am I right in thinking that all the CWP are inter changeable? Russell do you have any cwp for sale ?
- Sun Dec 31, 2017 10:26 am
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
- Sat Dec 30, 2017 5:52 pm
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
Hi Richard Your right it's a nightmare lol so has my car stands now with the 3.7 diff at 70 I'm doing 4500 revs so the 3500s gearbox I have is a 3.08 . So the axle I have got fit is a ratio of 3.33 so it's closer to the 3.08 I need to natch my gearbox I think I'm just going to fit it and see what it...
- Sat Dec 30, 2017 2:38 pm
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
Hi Richard You've got me thinking now I've Google the ratio of my gear box and I seem to get is its a 3.54 when I first did my engine swap my different was 3.89 and was no good to drive on the road which it is used for and the odd drag strip so then I put a 3.7 ratio different in which was better bu...
- Sat Dec 30, 2017 10:53 am
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
- Fri Dec 29, 2017 3:47 pm
- Forum: Drivetrain & Transmission Area
- Topic: 4ha reliant scimitar axle
- Replies: 16
- Views: 10837
4ha reliant scimitar axle
Hi guy's Hope you all had a good Christmas. I bought a reliant scimitar axle to go on my 4.5 humber sceptre , I'm on my 3rd diff now and not got any more so I thought it's about time to upgrade, so I bought this axel the guy told me it was a 3.54 ratio but when I got it and started to stop it I noti...
- Thu Dec 08, 2016 8:43 pm
- Forum: Engines Area
- Topic: Engine identify
- Replies: 2
- Views: 2013
Are you sure this isn't a casting number - cast into the side of the block. The engine number is usually found stamped into the top of the block on the left hand side between the two centre cylinders. No its stamped where the dipstick goes in I will try to put a pic up Ha no I can't post one just t...
- Mon Dec 05, 2016 8:11 am
- Forum: Engines Area
- Topic: Engine identify
- Replies: 2
- Views: 2013
Engine identify
Hi guys I've just picked up an 3.9 engine its been stored and never run since he ordered it many years ago it's got a engine number I can't seem to find on a list 9762/3.9/AE03 the heads onhave been confirmed has JE heads but the engine number isn't his , so Any help or info would be grateful Dave
- Thu Aug 20, 2015 9:20 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Modifying the Rover V8 inlet manifold for a Ford carb?
- Replies: 7
- Views: 5952
I couldn't find any threads on here. Do you have any more info Rob? I can't find much at present, and in fact some have said the std manifold doesnt flow that well anyway. I think I'm going to buy the Edelbrock performance manifold just to get the engine finished, and I can always research and test...
- Sun Apr 12, 2015 4:18 pm
- Forum: Drivetrain & Transmission Area
- Topic: propshaft or not
- Replies: 7
- Views: 4195
- Sun Apr 12, 2015 2:29 pm
- Forum: Drivetrain & Transmission Area
- Topic: propshaft or not
- Replies: 7
- Views: 4195
propshaft or not
Hi guys I've had my V8 humber on the road for about six weeks now and ever since its first motor way journey it's had a vibration from the backend but IT'S not always there there first I went and got my wheels balanced. Still vibration but I can't narrow it down to what it is a rand the company who ...
- Mon Mar 23, 2015 6:52 am
- Forum: Your Garage Scene
- Topic: Humber sceptre mk3
- Replies: 16
- Views: 6744
Hi Chris yes its on the list of to do my stock axle is holding up ok so far but I will kn in the very near future I will have to put a capri or scimitar axle and the front is in hand GAZ are in the process of finding out what sort of work they can do on my struts and brakes but as it stands if it's ...
- Sun Mar 22, 2015 7:08 pm
- Forum: Your Garage Scene
- Topic: Humber sceptre mk3
- Replies: 16
- Views: 6744