Search found 2115 matches
- Sat Aug 24, 2013 11:17 pm
- Forum: Drivetrain & Transmission Area
- Topic: LT77 problem
- Replies: 5
- Views: 4520
- Sun Aug 18, 2013 10:20 pm
- Forum: General Chat Area
- Topic: Are there any electricians on the Forum?
- Replies: 10
- Views: 4512
They might need to ask for a commercial section, I know my mate has a 3 phase supply at the bottom of his garden, I ran a 3 phase armoured cable to the bottom of the post and left enough to connect the cable, the rest of his workshop was wired to spec, they still charged him £1700 to connect it up, ...
- Fri Aug 16, 2013 7:19 am
- Forum: Engines Area
- Topic: Compression Ratios
- Replies: 7
- Views: 4964
Depends on cam, If you use an overlap cam, you bleed compression off, I was running a healthy 13.9 ;1 cr on my last engine. that on paper is far too high to be safe on the street, It worked!!, although the static comp was 13:9, the dynamic compression was nearer 11:1 (as far as I could work out) and...
- Tue Jul 23, 2013 11:39 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Reducing CR??
- Replies: 11
- Views: 5983
- Mon Jun 03, 2013 6:45 am
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Shell fuel save petrol any thoughts.
- Replies: 18
- Views: 9531
- Fri May 24, 2013 1:42 pm
- Forum: Drivetrain & Transmission Area
- Topic: Where can I get a 9.5 inch clutch plate only?
- Replies: 4
- Views: 3924
- Mon May 13, 2013 9:31 pm
- Forum: Engines Area
- Topic: RV8 - Installation of Kenne Bell Rollers - Questions
- Replies: 35
- Views: 23667
- Mon May 13, 2013 2:31 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Refurbing Kenne Bell roller rockers
- Replies: 6
- Views: 4423
John Eales has odds n sods laying about for KBs,
TA performance took over the rights to KB Buick stuff a few years ago, Im sure they have spares too,
http://www.taperformance.com/
TA performance took over the rights to KB Buick stuff a few years ago, Im sure they have spares too,
http://www.taperformance.com/
- Sun May 12, 2013 7:59 pm
- Forum: Engines Area
- Topic: RV8 - Installation of Kenne Bell Rollers - Questions
- Replies: 35
- Views: 23667
- Sun May 12, 2013 6:04 pm
- Forum: Engines Area
- Topic: RV8 - Installation of Kenne Bell Rollers - Questions
- Replies: 35
- Views: 23667
I see you have outriggers Pel, Are they too tight?, It looks like the are rubbing, I eventually dumper the springs, and converted to alloy spacers, and used thin spring washers to take up the slack, What mounts do you refer to?, Mine used standard pedestals, IIRC I had to turn the bolt heads down fo...
- Thu May 09, 2013 9:05 pm
- Forum: Engines Area
- Topic: RV8 - Installation of Kenne Bell Rollers - Questions
- Replies: 35
- Views: 23667
I ran KBs for ages, It might be a worth a call to John Eales. He kept spares for them, RPM limit, I buzzed my rover beyond 8k on cast rockers, never broke any rockers, so believe me 6500 is not a problem, outriggers unlikely to be needed, unless you are running totally stupid springs, but then you a...
- Sun May 05, 2013 8:21 pm
- Forum: Engines Area
- Topic: tadpole pressure relief valve - where from?
- Replies: 3
- Views: 3326
- Mon Apr 29, 2013 2:34 pm
- Forum: Brakes & Suspension Area
- Topic: Brake servo
- Replies: 18
- Views: 21601
- Sun Apr 28, 2013 3:41 pm
- Forum: Brakes & Suspension Area
- Topic: 4 pot vs Single calipers
- Replies: 11
- Views: 11743
- Sun Apr 28, 2013 2:53 pm
- Forum: Brakes & Suspension Area
- Topic: 4 pot vs Single calipers
- Replies: 11
- Views: 11743
Hello Dave,Devonrod wrote:http://www.rallydesign.co.uk/product_in ... s_id=13593
Front brakes mate, You must have a pair of calipers tucked away in your garage, I know you have everything else, including a washing machine 27 engines, and 3 cars last time I was up there,