Hi guys.... I'm try in to track down a pin out diagram for a 2000 Jaguar XJR engine ECU.
Basically pulling the engine and running stand alone ecu, but knowing what wire does what at the ECU plug will save a lot of time hooking up the new ECU!
Cheers
Jono
Search found 356 matches
- Tue Nov 07, 2017 10:27 pm
- Forum: Electrical & Ignition Area
- Topic: ECU pin out diagram for xjr
- Replies: 1
- Views: 1422
- Sat Feb 07, 2015 10:41 pm
- Forum: Engines Area
- Topic: chevy 350 rebuild..... lets talk parts!
- Replies: 15
- Views: 7326
Excellent. Mike, that's what I wanted to hear, I'm going to be using the pistons and rods that are there as they are in good nick and are forged aswell all be it stock chevy itsms. And a rev kit is something.I'm looking at getting my hands on! Any sujestions on ignition system, so I can keep an eye ...
- Sat Feb 07, 2015 6:17 pm
- Forum: Engines Area
- Topic: chevy 350 rebuild..... lets talk parts!
- Replies: 15
- Views: 7326
Staying n/a with this as I haven't got blower money or a tank big enough to feed it!! Want it to be fairly unstressed as I want it reliable for my drifting! The rover lump has shut a lot of people up as it just keeps on going and starts every time, but doesn't push enough power for the big track! Al...
- Sat Feb 07, 2015 1:21 pm
- Forum: Engines Area
- Topic: chevy 350 rebuild..... lets talk parts!
- Replies: 15
- Views: 7326
chevy 350 rebuild..... lets talk parts!
Right guys, I know a few of you are probably thinking "oh f**k sake just get on with the build!" so apologies! Basically I've stripped the 4bolt chevy that was supposed to have been a fresh build set upfor a blower... But this was far from the truth!!! Opened the engine up and found high compression...
- Tue Jun 03, 2014 10:54 pm
- Forum: Engines Area
- Topic: sbc internal/external. balance flywheel???
- Replies: 7
- Views: 3663
- Tue May 20, 2014 9:59 pm
- Forum: Engines Area
- Topic: sbc internal/external. balance flywheel???
- Replies: 7
- Views: 3663
sbc internal/external. balance flywheel???
What's the difference people?? I'm needing a new one, but not sure what's needed!! It's for an old cast block with 2 piece Main seal!
Cheers jono
Cheers jono
- Sun Mar 30, 2014 9:13 am
- Forum: Engines Area
- Topic: Chevy 5/8 7/16 rockers.... what's the difference??
- Replies: 4
- Views: 2612
- Sat Mar 29, 2014 10:40 pm
- Forum: Engines Area
- Topic: Chevy 5/8 7/16 rockers.... what's the difference??
- Replies: 4
- Views: 2612
- Sat Mar 29, 2014 7:40 pm
- Forum: Engines Area
- Topic: Chevy 5/8 7/16 rockers.... what's the difference??
- Replies: 4
- Views: 2612
Chevy 5/8 7/16 rockers.... what's the difference??
Like the title says guys what is the difference between the 5/8 and the 7/16 rockers?? Is it just the collars on the Polly lockers or is it the threads on the rocker studs??? Just want to find out so I don't get the wrong bits for my cast camel hump heads!!
Cheers
Jono
Cheers
Jono
- Thu Mar 20, 2014 11:28 am
- Forum: Engines Area
- Topic: opinions on this comp cams grind
- Replies: 7
- Views: 4312
Hi guys, sorry to be pestering all the time! I've missed out on the cam above as the guy wanted $200 to ship it to the UK which I thought was taking the P a little! But I've just bought some parts of a chevy man and he has got a full retro fit roller cam with uprated push rods, and roller lifters, b...
- Sun Mar 16, 2014 9:16 am
- Forum: Engines Area
- Topic: cam gear set.... what's your opinions??
- Replies: 7
- Views: 2981
cam gear set.... what's your opinions??
Hi guys just wandering what your thoughts are on the cam gear sets for the 350 chevy instead of the usual timing chain???
They seem to be Perry cheep and would eliminate any chain slack!
Jono
They seem to be Perry cheep and would eliminate any chain slack!
Jono
- Fri Mar 14, 2014 10:34 am
- Forum: Engines Area
- Topic: Chevy Flat Tappet - roller lifter conversion??!!
- Replies: 1
- Views: 1651
Chevy Flat Tappet - roller lifter conversion??!!
Hi guys, I was searching the net the other night and came across someone who had made there own retro fit lifters from the later style chevy lump components. Now from what I can see he has fitted the retaining spider in to the block by drilling and tapping the relevant fittings in to his pre roller ...
- Wed Mar 12, 2014 10:00 pm
- Forum: Engines Area
- Topic: cam gear set.... what's your opinions??
- Replies: 0
- Views: 10659
cam gear set.... what's your opinions??
Hi guys just wandering what your thoughts are on the cam gear sets for the 350 chevy instead of the usual timing chain???
They seem to be Perry cheep and would eliminate any chain slack!
Jono
They seem to be Perry cheep and would eliminate any chain slack!
Jono
- Tue Mar 11, 2014 10:15 pm
- Forum: Engines Area
- Topic: opinions on this comp cams grind
- Replies: 7
- Views: 4312
My bad, it was the gearbox that went not the bottom end!! The engine is going in to a rift truck and is only used on track and weighs in at about 1400kg. Going to be running custom tubular headers, holley 600com double plumper, and not sure on the inlet as yet as I'm still to get one!! But I should ...
- Sat Mar 08, 2014 9:17 pm
- Forum: Engines Area
- Topic: opinions on this comp cams grind
- Replies: 7
- Views: 4312