Jumping on this old thread. Have found some 8mm spacers to raise the standard rover rocker covers from the states.
Will 8mm be enough to raise them over roller rockers?
Has anyone found ally spacers in the UK?
Search found 7 matches
- Tue Feb 16, 2021 3:24 pm
- Forum: Engines Area
- Topic: Yella Terra Rockers standard Rocker covers?
- Replies: 7
- Views: 3977
- Sun May 15, 2011 6:48 pm
- Forum: Drivetrain & Transmission Area
- Topic: GPS Speedo?
- Replies: 3
- Views: 2596
- Sun May 15, 2011 7:41 am
- Forum: Drivetrain & Transmission Area
- Topic: GPS Speedo?
- Replies: 3
- Views: 2596
GPS Speedo?
Hi Have seen that the VOSA have changed the rules for the MOT and vehicles now have to have a working speedo. Problem is that mine hasn't worked for the last 4 years :shock: Have changed the speedo cable from the T5 box but this didn't fix it. Have looked to replace the speedo drive to find that the...
- Fri Apr 08, 2011 8:37 pm
- Forum: Engines Area
- Topic: Damaged block
- Replies: 9
- Views: 4019
Damaged block
Hi Have brought a Rover 3.9 block which upon inspection was found to have bad scratches in a few of the bore and, upon taking it apart, a crank that was scratched. The con rods shells had also gone through to the copper in places. :cry: Would post some pictures on here but haven't figured out how to...
- Mon Mar 14, 2011 3:47 pm
- Forum: Engines Area
- Topic: RV8 Distributor oil feed
- Replies: 2
- Views: 2046
RV8 Distributor oil feed
Hi Just started building up a 3.9 engine and am looking at doing the oil feed mod to improve lubrication to the distributor. Have removed the bolt from the bottom of the oil cover to drill out and tap to take a banjo bolt. However having looked at it I think its going to leave the bolt too thin. Has...
- Thu Feb 24, 2011 8:47 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: 4.6 heads or refit my 3.5 heads
- Replies: 8
- Views: 5791
- Sun Feb 20, 2011 8:21 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: 4.6 heads or refit my 3.5 heads
- Replies: 8
- Views: 5791
4.6 heads or refit my 3.5 heads
Hi I'm fitting a 3.9 block to replace the 3.5 engine in my Capri. I've been offered a set of 4.6 heads which need the valves ground in and the stem seals replaced. Would these be better to fit or should I get my existing 3.5 heads checked, that they're flat, and refit them? I would probably use the ...