The V8 Owners Forum -

hi perry i have had it on a dyno ill attach a photo for you to look at. would you be able to link me to a website with the nitrous kit you'd reccomend for my set up. i might treat my self for xmas hahaha :). any feed back on dyno would be great see you in 3-4 months maybe get a shot at your mg haha ...

hi perry the times from last run the 13.4 0.2625 1.9398 5,5141 8.5533 80.68 13.4412 97.30 the write up on the engine is as follows rover v8 engine 3.9 stage 3 heads just had new valve guides, new stem seals (new type 30cc) new valve seats 3 angle in heads , new shells and mains , new distributor wit...

hi phill no problem . hopefully see you down there again soon

hi perry. this one is from july reaction - +4.506 60ft - 2.0417 330ft - 5.6829 1/8 - 8.8021 1/8 - 78.55 1000 - 11.4491 1000 - 92.94 1/4 13.7106 1/4 97.98 reaction - .3690 60ft - 2.1133 330ft - 5.8871 1/8 9.048 1/8 76.05 1000 - 11.8204 1000 - 90.16 1/4 - 14.1257 1/4 96.93 theres two from july and one...

hey perry.

yeh that would be awsome. try and get this mini blowing a 12 second been close haha.

any help would be much appricated and hopefully have a run up the track next to your mgb for a giggle.

see you at the flame and thunder

cheers mick

hey there perry. yes the guy we bought the pump off happend to be down on sunday and had 2 of the fins on him haha. we got the pump to work tempoary got a 13.3 best of the weekend. but i have been lookin into the edelbrock pumps and found there common for loosing pressure when the car warms up, so i...

hi guys , thought id finally add my build of my mini van and all through the v8 conversion i did last year. its running a 3.9 range rover v8, port and polished stage 3 heads, tubluars, 500 edddy carb. on a lt77 gear box. specialy made prop. and mgb gt rear axle with a quaifee in it. the car has had ...

i live in mansfield what is the closest dyno/rolling road place to set up my car.

hey sidecar i have a question for you. i have a 3.9 range rover v8 with stage 3 heads,tubulars and a 500cfm eddy on. i cant remember what jets and rods i have in it with out strippin it down. what would you suggest for prim,sec, jets and rods/springs as its in a mini van with 5 speed lt77 and rear w...

guys could really use some imput can i remove the vacuum or shall i jsut leave it? need to no as im drag racing in 2 weeks thanks

its a 3.9 range rover 35D 500 edel borck

hi there i have bought a uprated distributor, il attach link to the item i have bought. http://www.ebay.co.uk/itm/120717865699?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 it has a vacuum on do i need to remove the vaccuum, or not. if i do what do i need to do to the timing etc any help much a...

the car of the deck is great and goes like a rocket til about a 1/4 way up track then it happens, it never happens off the deck some times it gets nearly all the way up then does it. everything possbile has been changed. only two things left to change are the dizzy and the swap the eddy to a holley

hi there i have a 3.9 36D engine runing stage 3 heads, tubualr manifolds, 500 edelbrock and intake. recently rebuilt and all pistons are producing 165+ on a pressure test. the car has a edelbrock fuel pump running 5.5psi at the carb. the carbs been rebuilt. and the issue is when the car is drag raci...

hey all sorry to rebring this up, but i have a sherpa short shift in me mini v8 and the selector bush is about had it, ive looked all over emailed every one i could think of with 0 luck. can some please point me in direction of either a jag or sherpa place that sells the selector bush thanks nylon g...