jacobs controller
Moderator: phpBB2 - Administrators
jacobs controller
think this is the right place for this , ive got a jacobs progressive controller, and im using a mallory unilite and c4 coil, the wiring diagram for the controller shows a yellow wire going to a green from the coil , and red to the red wire from the coil and ballast resistor, the c4 coil doesnt have any wires coming from it, and the unilite diagrams dont show the use of a controller, any ideas as ive lost the 2nd sheet of the wiring rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
- russell_ram
- Getting There
- Posts: 238
- Joined: Mon Nov 20, 2006 1:03 pm
- Location: Midlands
hi, i dont think i got it over to good on the post, the wiring diagram would be great if you could put that up for me, ive lost the part about the red and yellow and red and white wires and where they go, as the nos system does not work, and i want to check the wiring, thanks again rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
well i couldnt the controller to work, i checked the jets and i assume they are a 50 shot, 43 and a 32 , if i remember right,
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
hi Perry, not at the moment, i wired the nos up to go off the button and forgot the controller, but i still need the diagram for it, so as to check the wiring of it, how you doing, and i need a number 47 jet as real steel had run out of them, and i need it for the 75 and 100 shot,
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
has anyone got the wiring diagrams for the jacobs nos controller to the hyfire box and unilite dizzy please that they could post up or e-mail to me, thanks for any help rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
ok i got some diagrams now for the controller, rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
happy days, we got the controller wired up , going to test it at the weekend, october at the pod looks good rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
-
- Forum Contributor
- Posts: 2419
- Joined: Sat Nov 18, 2006 1:59 pm
- Location: Far Far south, any further south and my feet are wet
No, just a quick test on a bit of road to see if the controller is doing what it should do, and ive never been to battlebridge ,whats it like ? rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
-
- Forum Contributor
- Posts: 2419
- Joined: Sat Nov 18, 2006 1:59 pm
- Location: Far Far south, any further south and my feet are wet
theres a Ford show down there on Sunday, If I can get my car back together I will be there. The last one I went to was packed out, its only about 20mins from you, over the little bridge and behind the antiques mill? probably a good move to get there reasonably early as the little road gets busy.
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
didnt make it to battlebridge, but i did test the controller and it works fine, got jets for a 125 shot in october, rich
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps
Ok time to drag this old post back up, the jacobs controller doesnt seem to be working the solenoids, the solenoids are if i by pass the controller, Is there away of testing the jacobs is letting power to the solenoids, I will be going through the wiring again to see if i have a bad connection somewhere, The trigger switch and arming switch are fine and so are the solenoids, so it looks like the controller is messing about,
Nightbreed racing, http://www.youtube.com/watch?v=NJoUTZ8UUps