Hi,
I have mounted a RC87 cam in my 3.5.
There are no data in the web expect it is a cam from Rovercraft.
Has anyone more data ?
Rovercraft RC87 cam --> Data?
Moderator: phpBB2 - Administrators
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
-
- Forum Contributor
- Posts: 3979
- Joined: Sat Nov 18, 2006 6:22 pm
- Location: Northern Ireland
Thank you...
The RC87 will have 26/66 and the lift I measured with around 10.2mm inlet and 10.0mm exaust.
There would be much wilder cams out there - even when the engine were able to go up to 12mm lift and 6000rpm with Piper VTSV8 tripple valve springs and Federal Mogul steel rockers.
I will think about using Kent H218.
What do you think...?[/img]
The RC87 will have 26/66 and the lift I measured with around 10.2mm inlet and 10.0mm exaust.
There would be much wilder cams out there - even when the engine were able to go up to 12mm lift and 6000rpm with Piper VTSV8 tripple valve springs and Federal Mogul steel rockers.
I will think about using Kent H218.
What do you think...?[/img]