Help. Pics Needed
Moderator: phpBB2 - Administrators
-
- Getting There
- Posts: 246
- Joined: Fri Aug 17, 2007 2:25 pm
Help. Pics Needed
My Hotwire plenum had a load of cruise-control gubbins that was getting in the way of my intake hose so I removed it all.
Could someone possibly show me some pics of the simplest possible throttle cable setup with least amount of parts?
Thanks.
Could someone possibly show me some pics of the simplest possible throttle cable setup with least amount of parts?
Thanks.
-
- Getting There
- Posts: 246
- Joined: Fri Aug 17, 2007 2:25 pm
Well, bits from an SD1 EFI will fit your plenum. The usual cable from there to the pedal. Or the bits from a hotwire without cruise?
I've not really seen a hotwire cruise. On the SD1 EFI, the cruise motor simply unclips from the throttle lever.
I've not really seen a hotwire cruise. On the SD1 EFI, the cruise motor simply unclips from the throttle lever.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
Yup - sounds like the Hella system fitted to later SD1.unstable load wrote:My P38's cruise is the old fashioned bellows and cable set-up with a vacuum pump instead of manifold supply to improve control.DaveEFI wrote:I've not really seen a hotwire cruise. On the SD1 EFI, the cruise motor simply unclips from the throttle lever.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y
fuel lines on by john fraser, on Flickr
cut down linkage 1 by john fraser, on Flickr
Do these help any ?
cut down linkage 1 by john fraser, on Flickr
Do these help any ?
So thats where it went !
-
- Top Dog
- Posts: 1278
- Joined: Mon May 04, 2009 6:53 am
About half way down this page, http://www.cowdery.org.uk/miscv8.php is a few pictures of the GEMS manifold, one from an SD1 and the later 4.6 one.
Cheers,
John
John
-
- Getting There
- Posts: 246
- Joined: Fri Aug 17, 2007 2:25 pm
John that looks like a nice compact setup compared to mine. Are those standard sd1 parts?JSF55 wrote:fuel lines on by john fraser, on Flickr
cut down linkage 1 by john fraser, on Flickr
Do these help any ?