arp flywheel bolts

Seight-V8 · Post by **Seight-V8** » Sat Sep 12, 2015 1:24 pm

hello all,

can anyone confirm the sizes of the ARP flywheel bolts for the rover v8?

bolt head size & socket required

length & thread.

The ones I have don't have much space for the socket between the bolt & the crank shaft where the spigot bearing goes.....

Not sure if the head sizes on the bolts I have a correct.

cheers

scott

Seight-V8 · Post by **Seight-V8** » Sat Sep 12, 2015 1:43 pm

sorted already, I've got the wrong ARP flywheel bolts....

I have 200-2802 bolts which are 7/16-20 1ins long 3/4 socket....

but should have

200-2807 bolts which are 7/16-20 1ins long 5/8 socket....

time to buy some new ones.

scott

Blown v8 · Post by **Blown v8** » Sat Sep 12, 2015 5:01 pm

Mine were really tight,I had to turn a socket down to get them to fit,
(I think that makes sense !)

Seight-V8 · Post by **Seight-V8** » Sat Sep 12, 2015 6:51 pm

Cheers looks like an option to me.

Will get a new 3/4 socket and get it reduced at work to make it fit.

Regards

Scott

DEVONMAN · Post by **DEVONMAN** » Sat Sep 12, 2015 7:28 pm

I just ground away the outside of the socket. Not as pretty as doing it on a lathe but it got me out of trouble on a Saturday afternoon.

Denis

stevieturbo · Post by **stevieturbo** » Sat Sep 12, 2015 7:43 pm

Likewise, had to lathe a socket when I fitted them on mine

ChrisJC · Post by **ChrisJC** » Sun Sep 13, 2015 12:10 pm

What is the problem with standard bolts?

Chris

Post by **Coops** » Sun Sep 13, 2015 1:29 pm

I too had to turn down a 3/4 socket in a lathe to fit the bolts

stevieturbo · Post by **stevieturbo** » Sun Sep 13, 2015 4:27 pm

ChrisJC wrote:What is the problem with standard bolts?

Chris

Probably not a lot really...but ARP are nice lol