Rover water pump pully size?

Jono FD3 · Post by **Jono FD3** » Fri Oct 14, 2011 4:28 pm

Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!

Cheers
Jono

DEVONMAN · Post by **DEVONMAN** » Fri Oct 14, 2011 6:11 pm

Jono FD3 wrote:Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!

Cheers
Jono

My alloy one is 175mm diameter. It's fitted to a p5/p6 type pump.
Cheers Denis

Jono FD3 · Post by **Jono FD3** » Fri Oct 14, 2011 6:36 pm

is that the type that is secured by 3 bolts close to the pump housing with a fan bolted to the end with 4 bolts?

Cheers
Jono

DaveEFI · Post by **DaveEFI** » Fri Oct 14, 2011 6:36 pm

Jono FD3 wrote:Hi guys, couls someone tell me the diamiter of the waterpump pully on the rover lumps (not the serpentine type)
I'm having a bit of bother finding one, and the new ones are about £50 so I had a thought of spinning up an aloy one on the lathe as the material can be had for sencible money!

Cheers
Jono

It rather depends on the water pump you're using. There are two listed for the SD1 - one NLA, the other about 25 quid from Rimmer. I'd guess Landie ones are cheaper.

DEVONMAN · Post by **DEVONMAN** » Fri Oct 14, 2011 7:01 pm

Jono FD3 wrote:is that the type that is secured by 3 bolts close to the pump housing with a fan bolted to the end with 4 bolts?

Cheers
Jono

Yes, P5/P6 type. The pulley is amost a flat plate.

It's not the SD1 type with a viscous fan.
SD1 pulleys are dished shape.

ian.stewart · Post by **ian.stewart** » Fri Oct 14, 2011 8:31 pm

if you want a P5/6 pulley, I have one kicking about, if i can find it, £10 posted,

Jono FD3 · Post by **Jono FD3** » Sat Oct 15, 2011 12:21 pm

ooooo, that would save me some time

Any chance of a pic and measurments of the centre hole just to make sure it's the right one???

Cheers
Jono

ian.stewart · Post by **ian.stewart** » Sat Oct 15, 2011 2:19 pm

pictures are a problem, as I am in the process of moving house, everything useful is packed like my camera, and other helpful things, but if you pm me your mobile number I may be able to send you one

ian.stewart · Post by **ian.stewart** » Sat Oct 15, 2011 2:52 pm

some aprox dimensions, Outside dia is about 6.75", bore is about 3.675. and there are 3 bolt holes on about 4,25 pitch

Jono FD3 · Post by **Jono FD3** » Sat Oct 15, 2011 4:28 pm

Cool, cheers matey!
I'll PM you my mob in a mo, and I'll have a measure of my water pump tomoz as it is up the farm

Cheers
Jono

The V8 Owners Forum -

Rover water pump pully size?

Rover water pump pully size?

Re: Rover water pump pully size?

Re: Rover water pump pully size?