radiator issue

General Chat About Cooling & Overheating

Moderator: phpBB2 - Administrators

Post Reply
v8mini1
Newbie
Newbie
Posts: 38
Joined: Fri Jan 29, 2010 2:05 pm

radiator issue

Post by v8mini1 »

im after a radiator for my v8 project ive found a few that can imprt from america but there all out of stock, does any 1 no a car that might have a very similar rad sizes can be a little smaller but no bigger thanks.

Image



User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5041
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

Your best bet is to go up your local scrapyard with a tape measure.....

However, somebody did find a website with a table of various rad sizes. I can't recall what it was though.

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8

User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Post by Ian Anderson »

http://cgi.ebay.co.uk/TOYOTA-SUPRA-TURB ... 518c916c9a


E bay has loads of different ones (I searche for alloy radiator) - this would be similar size - rad cap on different side

A bit of time searching gave good results

Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

Post Reply

Return to “Cooling Area”