hey people,
im new on here and have signed up for some help on my next project.
i have 1974 datsun 120y saloon which i want to drop a V8 into, my main concern is the weak looking rear suspension setup.
i want to do away with the leaf springs and run a four-link setup.
is there anywhere that sells kits or can fabricate me a kit?
many thanks.
luke.
rear leafs to strut
Moderator: phpBB2 - Administrators
-
- Top Dog
- Posts: 2334
- Joined: Sat Aug 18, 2007 5:09 pm
- Location: Sidcup, Kent, UK
Luke,
Welcome to the forum, there are quite a few people doing 4 link kits and of course with most of these you need a Panhard rod for lateral location.
You could try Pop Browns who do loads of stuff including 4 link kits.
http://www.popbrowns.co.uk/
Alternatively you could try Real Steel who I think also do a kit.
Kevin.
Welcome to the forum, there are quite a few people doing 4 link kits and of course with most of these you need a Panhard rod for lateral location.
You could try Pop Browns who do loads of stuff including 4 link kits.
http://www.popbrowns.co.uk/
Alternatively you could try Real Steel who I think also do a kit.
Kevin.
cheers kevin.CastleMGBV8 wrote:Luke,
Welcome to the forum, there are quite a few people doing 4 link kits and of course with most of these you need a Panhard rod for lateral location.
You could try Pop Browns who do loads of stuff including 4 link kits.
http://www.popbrowns.co.uk/
Alternatively you could try Real Steel who I think also do a kit.
Kevin.
im hoping to bring the links more towards the centre of the car and run a narrow axel so i can fit some wide wheels under the rear.
im pretty sure im going to have to cut the boot completly out and fab myself a rear frame up to support al this
luke.
HONDA CIVIC EG5
1600 SOHC 16v
282BHP / 243WHP 207LBFT @ 11PSI
13.0 @ 112MPH
1600 SOHC 16v
282BHP / 243WHP 207LBFT @ 11PSI
13.0 @ 112MPH