Stag bonnet with a bulge
Moderator: phpBB2 - Administrators
-
- Newbie
- Posts: 37
- Joined: Tue Nov 28, 2006 12:38 pm
Stag bonnet with a bulge
Hi, anyone know where I can buy a Stag bonnet with a bulge to fit my car which has a Rover V8 fitted, or a reasonably priced manifold/carb/filter set to give the required clearance for a standard bonnet? Thanks. Russ
dunno about a bonnet with a bulge, but you could retrofit a bulge to your existing bonnet. I have to do something similar for my MGB, as fitted with a RV8 they have similar clearence issues.
Alternatively you can get complete manifold/carb sets, often from ebay. Think the lowest manifold is the Offenhauser, and with a Weber/Edelbrock 500 carb should fit ok, although you're looking at 500+ sheets new. I think RPi and V8 Tuner do them as kits.
Alternatively you can get complete manifold/carb sets, often from ebay. Think the lowest manifold is the Offenhauser, and with a Weber/Edelbrock 500 carb should fit ok, although you're looking at 500+ sheets new. I think RPi and V8 Tuner do them as kits.
- Clockwork Orange
- Newbie
- Posts: 8
- Joined: Mon Apr 09, 2007 12:02 am
- Location: Glasgow Scotland UK
- Contact:
http://www.smithanddeakin.co.uk/index.htm
dont see one in there parts list - but they were nice to talk to last time I dealt with them..
something different - 'shaker scoop' or see the likes of the mustang sites, 'cos they do bolt on bulges ..
but the Stags are a nice shape, I would tend to go for a low manifold as previously said..
dont see one in there parts list - but they were nice to talk to last time I dealt with them..
something different - 'shaker scoop' or see the likes of the mustang sites, 'cos they do bolt on bulges ..
but the Stags are a nice shape, I would tend to go for a low manifold as previously said..
Just a wee V8 Rumbling along - too slow to win, too old to give a F...!!!