OMVL single port
Moderator: phpBB2 - Administrators
OMVL single port
OMVL single port set up on my 90 v8 all works with out any problems only thing is the safety relay got removed when i changed over engines, does any one know how to wire it up? like i said its just a safty relay four wires and a bridge on it, any help be great,thanks mark.
If this is the relay you mean http://www.autogasshop.co.uk/safety-tim ... -382-p.asp.
Positive and earth are self explaining the 2v are the outputs to your solonoids and the right hand symbol bit like pye is signal from the coil. Usually this is a wire wrapped around the coil to dizzy ht lead.
The relay only stays energised while there is a signal from the ht lead to the relay.
Hope this makes sense mick
Positive and earth are self explaining the 2v are the outputs to your solonoids and the right hand symbol bit like pye is signal from the coil. Usually this is a wire wrapped around the coil to dizzy ht lead.
The relay only stays energised while there is a signal from the ht lead to the relay.
Hope this makes sense mick