Turbo Rv8

General Chat And Help Regarding Turbocharging and Supercharging.

Moderator: phpBB2 - Administrators

34coupe
Newbie
Newbie
Posts: 30
Joined: Tue Nov 21, 2006 10:41 pm
Location: cheshire

Turbo Rv8

Post by 34coupe »

Hey Guys after any info on twin turbo conversion on RV8 using twin SUs (as montego turbo)engine is in Ford Sierra hatch,engine is a 8:13>1 comp out of a Discovery Cheers Stu



chodjinn
Forum Contributor
Forum Contributor
Posts: 2284
Joined: Tue Nov 21, 2006 8:55 am

Post by chodjinn »

Yeah you could bolt two turbo SU carbs to a normal SU manifold and run the turbos directly into them.

I have a janspeed twin turbo conversion on my RV8, but I'm fitting EFI now so the two carbs I have are going spare. The bolt directly onto the turbo inlet (suck thru), so the fuel gets sucked into the turbos then into the manifold. I have the pipes and stuff as well, dont want much for them as they're no use to me now :)

34coupe
Newbie
Newbie
Posts: 30
Joined: Tue Nov 21, 2006 10:41 pm
Location: cheshire

Post by 34coupe »

That would be excellent,my engine was EFI but sold on the injection set up,do u have any pics of your instalation just to get a few ideas,i was thinking of having the manifolds coming forward as TVR ones and mounting turbos in front of engine and seting up some sort of ducts to keep the engine bay a bit cooler,PM me if u wish Cheers Stu

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

The SU's would work very well, but be slow to setup.

Id have definately stuck with the efi stuff, and fitted fuel injection though.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

34coupe
Newbie
Newbie
Posts: 30
Joined: Tue Nov 21, 2006 10:41 pm
Location: cheshire

Post by 34coupe »

Cheers guys,got a few books to have a look through so will let you know how i get on Cheers Stu

chodjinn
Forum Contributor
Forum Contributor
Posts: 2284
Joined: Tue Nov 21, 2006 8:55 am

Post by chodjinn »

depends how much room you have mate. Noticed you're in Cheshire - where abouts? I'm in liverpool - you could pop up for a brew one afternoon if ya like? PM me

smokeonthewater
Newbie
Newbie
Posts: 20
Joined: Mon Nov 27, 2006 3:19 pm
Location: Nottingham

Post by smokeonthewater »

Do you have any pics of your turbos chodjinn? or anything similar?
also what sort of spec were they i am thinking of maybe fitting some myself if i ever get round to it :) :?:

chodjinn
Forum Contributor
Forum Contributor
Posts: 2284
Joined: Tue Nov 21, 2006 8:55 am

Post by chodjinn »

http://www.spcc.co.uk/photos/Members%20Cars/MGB%20V8/

that's all the photos I have at the mo. Taken abotu 18 months ago. Car is now in bits, although the engine is going back in next week so long as I have all the bits lol.

The turbos I have are from a Janspeed kit as fitetd to the SD1s in the 1980s. Uses some fairly meaty Rotormaster turbos, basically a T3/4 hybrid. The compressor is quite big, think AR.70.

They are only running low boost at the moment - 5-6psi. Going to up it to 8psi if I can ever get to fettle the wastegates. Bah!

Sounds fookin mental though on full chat and pulls strong from about 1500rpm!

User avatar
mikeinatruck
Helpful or Confused
Helpful or Confused
Posts: 105
Joined: Tue Feb 06, 2007 8:48 am

Post by mikeinatruck »

I have just had a look at the engine picture, and drooled all over the keyboard! That setup would look awesome in my Landy if only I had the time and money!

chodjinn
Forum Contributor
Forum Contributor
Posts: 2284
Joined: Tue Nov 21, 2006 8:55 am

Post by chodjinn »

if you think thats nice you gotta see the new enigne with EFI and loads of spanky bits hehe :twisted:

Coops
Site Admin
Site Admin
Posts: 6317
Joined: Fri Nov 17, 2006 7:43 pm
Location: Newbury, Berks
Contact:

Post by Coops »

would one or a pair of these be ok on my 3.9?
http://cgi.ebay.co.uk/T3-Super-T-70-Tur ... dZViewItem
Regards Tony C (COOPS)
Image
MS2 V3.57 Ecu mapable efi and wasted spark ignition.
Procharger D1SC supercharger and Cossie RS500 Intercooler @ 14psi of Boost. 416 RWHP, (boost leak)
Forged 4.8 V8 kitted out with the dogs Cajones of parts. :D
Sponsored by: www.v8performanceparts.co.uk, www.interpart.biz, www.caprisport.com & www.baileyperformance.co.uk

stevieturbo
Forum Contributor
Forum Contributor
Posts: 3979
Joined: Sat Nov 18, 2006 6:22 pm
Location: Northern Ireland

Post by stevieturbo »

They might look nice. I wouldnt count on them lasting too long though.

No doubt a cheap Chinese unit. And the ad doesnt really give any useful info as to its size.

if it is in any way comparable to a T70 ( 70mm ) turbo, then a single would be plenty for a RV8. But you would never get a T70 with a T3 flange.

In one sentence it says its a 90mm turbo...then shows an 84mm exducer, which makes the first statement utter crap.

If buying a turbo, I would only buy from a reputable source, and buy a quality turbocharger.

AFAIK, This seller is the same as ss_autochrome...whos turbo reputation was well renowned.
9.85 @ 144.75mph
202mph standing mile
http://www.youtube.com/watch?v=XgWRCDtiTQ0

User avatar
Eliot
Top Dog
Top Dog
Posts: 1765
Joined: Sat Nov 18, 2006 9:46 am
Location: Milton Keynes
Contact:

Post by Eliot »

As stevie says, those xspower/ssautochrome turbos are of doubtful quality.
Eliot Mansfield
5.7 Dakar 4x4, 4.6 P38 & L322 TDV8
www.mez.co.uk / www.efilive.co.uk

User avatar
Spag
Newbie
Newbie
Posts: 34
Joined: Sat Nov 18, 2006 7:37 am
Location: Looking for his lost marbles (UK)
Contact:

Post by Spag »

Nice collection of 'arty' pics there matey, car looks really good :D

- Is the MR2 yours too ? Nice little motor the 4AGE innit ?
Ian (Spag)

www.spagweb.com - www.v8mini.co.uk
"The Roughest V8Mini Deathtrap In The World"
Image

chodjinn
Forum Contributor
Forum Contributor
Posts: 2284
Joined: Tue Nov 21, 2006 8:55 am

Post by chodjinn »

The MR2 is my housemates, been off the road for over a year but he's on about supercharging it now!!

Post Reply

Return to “Forced Induction”