Hi,
I have a M112 charger and looking at fitting it onto my rover 3.9.i have quickly looked at the position for it on the inlet manifold and the nose length wants to be 14 inch long.
it will just fit between the timing pulley and the waterpump belt so a new bottom pully with both belts will work great.
can you get longer nose lengths, for them or will i have to make a longer one myself.
Andy
M112 nose length
Moderator: phpBB2 - Administrators
- Rossco
- Moderator Gold
- Posts: 850
- Joined: Sun Nov 19, 2006 11:33 am
- Location: Too many to even keep count
Andy it is possible to get extended noses for the M112 but you will pay around £600 for one if you can find it.
I've still got a development manifold that we did for my Eaton M112 setup which moves the blower forward. It could do with a little more development but as a starting point it'll get you were you want to be.
As I know we share the same footie team you can pop round and take a gander if you want......or if you want I can bring it round to you. Many years ago as a student I lived just around the corner from you. I think the shop I lived over is now a piza take away
I've still got a development manifold that we did for my Eaton M112 setup which moves the blower forward. It could do with a little more development but as a starting point it'll get you were you want to be.
As I know we share the same footie team you can pop round and take a gander if you want......or if you want I can bring it round to you. Many years ago as a student I lived just around the corner from you. I think the shop I lived over is now a piza take away