engine pulleys

winkle · Post by **winkle** » Fri Sep 07, 2007 7:21 pm

Hi,

Ive seen quite a few pictures of rv8s using poly/multi-v pulleys on the alternator, water pump and crank.

Would these be generally one off, made by an engineering firm or can you buy them as a kit?

If you can get them as a kit, I would be grateful for info.

Cheers

Steve

Post by **katanaman** » Fri Sep 07, 2007 11:18 pm

unless you can use the 4.0-4.6 ones and get them spaced properly they will be made to measure. The crank one should fit ok with a spacer but the water pump will depend on what your using and you will have to use a 4.0-4.6 alternator to get that one to fit. I made my own ones but I am using a P6 pump so nothing else would have fitted.