Good and bad news

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
katanaman
Site Admin
Site Admin
Posts: 3081
Joined: Fri Nov 17, 2006 7:29 pm
Location: Edinburgh
Contact:
Contact katanaman

Post by katanaman »

P5 P6 should have the groove in the balancer but they also had additional pressed steel pulleys bolted on to them


Top
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

cheers mate,
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
Top
mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

So the spare engine I bought must have had a later pulley fitted.

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw
Top
ian.stewart
Forum Contributor
Forum Contributor
Posts: 2419
Joined: Sat Nov 18, 2006 1:59 pm
Location: Far Far south, any further south and my feet are wet

Post by ian.stewart »

certainly looks like a SDi one with the pip for the sensor thingy.
THE SMOKING GNU
12.604 with an old boiler of a RV8 and no gas
WHY are there so many IANS on this site???????
Top
Post Reply

Return to “Engines Area”