Page 1 of 1
EFI fuel lines
Posted: Tue May 03, 2011 9:29 pm
by sowat
I've got as far as the fuel side on my Hotwire convertion
Running a Range Rover in tank pump, and TIG welded a hose tail to the fuel rail ( to put it on the near side).
What lines/hose/pipes are being used out there ?
Posted: Wed May 04, 2011 6:54 am
by ChrisJC
If you mean between tank & fuel rail, I've always just used fuel injection hose, I forget which size, but it's readily available by the meter.
Chris.
Posted: Wed May 04, 2011 11:28 am
by SuperV8
I'm using high pressure rubber (EPDM) fuel injection hose. 8mm ID. from pump to fuel rail.
Tom.
Posted: Wed May 04, 2011 4:18 pm
by Ian Anderson
Ditto
8mm for everything including the return
I'd also say stay away from braided as it can perish the rubber underneath and you don't notice until you get a flood!
With the fuel mixes not all fuel hose only has a life span of about 4 years
Ian