Page 1 of 1
Book?
Posted: Sun Mar 18, 2007 5:08 pm
by Dziku
Hi, Can anyon have book "how to power tune rover v8 engine" in electronic version(pdf)?
Becouse in poland its dificoult to get it.
I will be pleased if anyone, could send me this.
Dziku
Posted: Sun Mar 18, 2007 6:02 pm
by sidecar
Not got any books in PDF form but here's a link to some interesting stuff:-
http://www.mez.co.uk/TuningTheRoverV8-intro.html
(I've got David Hardcastle's book in paper form and it not that good anyway!)
Posted: Sun Mar 18, 2007 6:59 pm
by Dziku
I've sugest myself, it would be good book, like "how to .... ford sohc pinto engine".... But if you say, it isn't, i'll give up.
I need step by step manual, how to get more power from 3,5l rover.
Dziku
Posted: Sun Mar 18, 2007 7:19 pm
by Alley Kat
Buying it is no prob, Amazon ship to Poland: see
here
cheers
Bill
Posted: Sun Mar 18, 2007 7:34 pm
by sidecar
Dziku wrote:I've sugest myself, it would be good book, like "how to .... ford sohc pinto engine".... But if you say, it isn't, i'll give up.
I need step by step manual, how to get more power from 3,5l rover.
Dziku
Don't let me put you off buying the book, it is OK as a general read but it does not give detailed step by step instructions. It just says things like "Get the heads proffesionally gas flowed" etc.
You can easily get this sort of info of the web and this forum.
Basically you will need a decent manifold, eg, Edlebrock dual plane, a decent carb, (or EFI) a cam and a head skim to get the compression to round 9.75:1 (depends on the octane rating of the fuel that you can get).
You could also get heads flowed, the engine rebored and stroked...the list goes on an on and the money spent goes up and up!
Regards,
Pete