Page 1 of 2
Shipping from the USA
Posted: Fri Oct 08, 2010 2:45 pm
by Rossco
I'm arranging a container if anyone is interested in buying space in it.
Tony has already said he's like to bring an axle back but that still leaves plenty of room.
Cheers
Rossco
Posted: Fri Oct 08, 2010 3:40 pm
by Coops
yup im defo interested allan, if anyone else wants to join in,
Posted: Fri Oct 08, 2010 4:07 pm
by topcatcustom
When is it Rossco? I may have a couple of bits but not definite yet,...
And where is it being loaded?
Posted: Fri Oct 08, 2010 6:52 pm
by Speed 8
I might be interested. Would be shipping two gearboxes. Approximately 100lbs each incl. crates. Would be needing them around january.
Posted: Fri Oct 08, 2010 7:26 pm
by kiwicar
If it is around December/ January I may also be interested in some space too, two axel shafts and a CW and pinion.
Mike
Posted: Tue Oct 12, 2010 7:45 pm
by Rossco
Timescales would be down to when Tony needs his kit.
Currently it would be from Atlanta
Posted: Tue Oct 12, 2010 7:52 pm
by Coops
not heard back from the guy in states yet
mailed him asking if the 3.08 was the only ratio he had he replied i have 3.27 and 3.55 axles,
i said the 3.27 is what i want is that a lsd etc as per the 3.08 ratio advert, and heard nowt back
Allan did you get my message regarding the pricing?
Posted: Wed Oct 13, 2010 7:52 am
by topcatcustom
Tony does the guy stock 5 stud LSD disc axles too?
Posted: Wed Oct 13, 2010 9:06 am
by Coops
Yes Tom
Posted: Wed Oct 13, 2010 11:34 am
by dbv8
If i was crazy enough to order a 600bhp crate 440 Mopar motor then what would be the additional costs involved?
Posted: Wed Oct 13, 2010 3:27 pm
by Coops
Only allan can say what the prices are as im still un sure what im paying out for
,
Posted: Wed Oct 13, 2010 3:28 pm
by kiwicar
"If i was crazy enough to order a 600bhp crate 440 Mopar motor"
That is not crazy. . . . . that is the action of a responsable adult investing in his future hapiness!!
Tony, Where are you getting your stuff from, does he do 9" ford axel shafts? do you have a link?
Mike
Posted: Wed Oct 13, 2010 3:45 pm
by Coops
Posted: Wed Oct 13, 2010 4:09 pm
by Coops
well i want 3.27 gears, but the axles with them in are too wide,
so its back to plan b, get the 3.08 ratio axle then fit a set of 3.27 gears later before racing next year.
Posted: Wed Oct 13, 2010 5:10 pm
by Rossco
Ok guys.
Depending on how many p[eople want in I can most likely do the shipping for under £100 each.
Everyone would be responsible for their own share of the customs duty unless I can persuade them that it's a job lot in which case I'd split the total across everyone's shipment, would work out cheaper that way.
If enough people wanted in to allow me to use a 20' container the cost of shipping would be less than £50 each.