Page 1 of 1
large bore plenum
Posted: Sun Sep 12, 2010 8:36 pm
by mgrv8
I have just got hold of a 71mm plenum for my project mgbv8 , its going to be a 5lt rv8 engine with hotwire system {ive got a tvr 5.0lt 14cux ecu and im going to use lamda sensors} .....
My question is can i use this plenum without going for a remapable ecu?? i was going to use this to get running and see how it works, and maybe latter go for megasquirt or sim system . Have any of you out there used a big bore plenum without changing ecu etc,...... thanks
Posted: Sun Sep 12, 2010 8:39 pm
by spend
Yes its been used with the Lucas many times, the AFM should adapt to it, IIRC the only problem it can throw up is if your TPS is misaligned or tracking badly?
Posted: Mon Sep 13, 2010 9:57 pm
by 5000SE
Should be fine.
If you were using a Lucas flapper you'd want to fit a Jaguar airflowmeter to go with it, but with hotwire it should just be a bolt-on upgrade, as long as the throttle pot transfers straight over.
large bore plenum
Posted: Tue Sep 14, 2010 6:56 am
by mgrv8
Yes im using hotwire system... i will have to learn how to set the throttle pot........... thanks guys