Page 1 of 1

v8 mini clubman van

Posted: Sun Aug 22, 2010 5:33 pm
by v8mini1
hi guys heres our mini van with a 3.9 v8 stage 3 heads and a 500 cfm edelbrock on her, took roughly 7months to build and had its first run down santa pod sunday at the mini show to test it,

Image

Image

Image

Image

Image

Image


Image

Image

Posted: Sun Aug 22, 2010 5:54 pm
by Will Reeve
stunning....are you sure you have a big enough radiator in there!

Posted: Sun Aug 22, 2010 6:18 pm
by v8mini1
well those pesky v8's are hard to keep kool lol

Posted: Sun Aug 22, 2010 9:24 pm
by v8trev
Nice -which front crossmember/ suspension set up you used there?

Posted: Sun Aug 22, 2010 10:28 pm
by Coops
v8mini1 wrote:well those pesky v8's are hard to keep kool lol
audi 5cyl ally rad half the size of yours and keeps my 4.6 well cool ;-)

Posted: Mon Aug 23, 2010 8:03 am
by andyv8van
Hi,

Great stuff, Another V8 in a mini.

I have used a standard SD1 size rad with twin cooling fans with no issues, got 65mm wide radiator in now , same frontal area size.Went bigger with getting the supercharger , so it will always keep it cool , even in traffic.

How did you go at santa pod?, was at show in my daily, its not the same :(

What set up are you using for the Suspension , axle , etc

regards

Andy

Posted: Tue Aug 24, 2010 6:18 pm
by v8mini1
hey all, its a triumph herald front end and suspension and a mgb gt rear axle santa pod went not bad did a 15.1 "92mph but the dif blew half way up. so got another and its gnna be tested.