Thread size Clutch Slave Cylinder
Posted: Sat Mar 20, 2010 9:45 pm
Does anyone know the size and thread of the inlet port on the standard SDI clutch skave cylinder
Thanks
Thanks
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Thread size Clutch Slave Cylinder
Page 1 of 1
Posted: Sun Mar 21, 2010 4:51 am
7/16unf or -4, both the same