Fitted size of a comp head gasket
Posted: Tue Feb 23, 2010 5:42 pm
Hello, hopefully an easy question, does anyone know the compressed size of a comp head gasket for a rover in mm?
Thanks.
Thanks.
The V8 Owners Forum -
Welcome to the well-known V8 Owners Forum, no matter what you drive if its V8 Powered you'll be made very welcome.
https://www.v8forum.co.uk/forum/
Fitted size of a comp head gasket
Page 1 of 1
Posted: Tue Feb 23, 2010 5:53 pm
1.2mm or 46thou
Posted: Tue Feb 23, 2010 8:07 pm
And the compressed thickness is equal to 8cc on the 94mm. bore size.
Kevin
Posted: Wed Feb 24, 2010 7:45 am
Oops typo.
Should say 48 thou.
Whats 2 thou between friends?
Should say 48 thou.
Whats 2 thou between friends?
Posted: Wed Feb 24, 2010 12:37 pm
I have in mind I measure around 1.12mm when they are removed.
Posted: Wed Feb 24, 2010 9:55 pm
i think they are 10cc
Posted: Thu Feb 25, 2010 8:37 am
If 1.2mm thick then it equates to 8.3cc
Posted: Thu Feb 25, 2010 9:07 am
On a 94mm bore yes.topcatproduction wrote:If 1.2mm thick then it equates to 8.3cc
Isnt the dia of the gasket a little more than the bore also?
Does anyone know the standard 4.6 landrover deck clearance?
Posted: Thu Feb 25, 2010 12:07 pm
From measurements I've recorded averages of 95.5 as the dia & 1.12 as the thickness, magically gives @8.026....cc.
Did the OP want clearance or volume?
Did the OP want clearance or volume?