Page 1 of 1
Jetting on a Weber 500 for a Rover 4.6???
Posted: Sat Jul 18, 2009 7:09 pm
by mgbv8
Do any of you run this combo?
What secondary jets do you use??
What primary jets and needles have you found to be best?
Perry
Posted: Sat Jul 18, 2009 7:25 pm
by Pocket rocket
Sidecar Pete is your man - here is a helpful (I hope) thread
http://www.v8forum.co.uk/forum/viewtopi ... highlight=
Posted: Sat Jul 18, 2009 8:24 pm
by mgbv8
Ta mate!
I'll have to get my jetting kit back from my chum
Perry
Posted: Sat Jul 18, 2009 9:05 pm
by sidecar
mgbv8 wrote:Ta mate!
I'll have to get my jetting kit back from my chum
Perry
Here is some more gumph that I've written about the Eddy carb.
(Below the bit on fuel pumps)
http://how-to-build-a-pilgrim-sumo.wiki ... ing-system
Pete
Posted: Mon Jul 20, 2009 8:56 pm
by mgbv8
Right!
She is now re jetted etc to a more lean setting.
I cant actually start it unstil saturday at the dyno as its too loud to do at home.
But I can try it and alter as needed now I've got my jetting kit back from my chum.
Posted: Tue Jul 21, 2009 5:42 pm
by CastleMGBV8
Perry,
I did make some suggestions to your questions in the events section.
Kevin.
Posted: Tue Jul 21, 2009 6:55 pm
by mgbv8
Ta Kev. XX