Page 1 of 1
plug leads and firing order
Posted: Thu Apr 30, 2009 6:12 pm
by V8 RX-7
have just changed plug leads from a range rover engine to sd1, was going to fit dizzy cap but is different, i want to make sure firing order is correct cannot anyone point me in right direction for a diagram etc havent got a manual yet.
Posted: Fri May 01, 2009 5:22 am
by RoverP6B
This will help
http://www.roversd1.nl/sd1web/
If by chance you end up at the home page, select techtalk, then electrics and finally ignition.
Ron.
Posted: Fri May 01, 2009 6:59 am
by ChrisJC
If you have lost the 'index', then remove the 'even' rocker cover, turn the engine until both valves on no. 6 are open equally. This point is No. 1 & TDC.
Chris.
Posted: Fri May 01, 2009 8:30 am
by V8 RX-7
many thanks for that