Page 1 of 1
Head Gasket Sizes
Posted: Sat Jan 06, 2007 10:20 pm
by Coops
What size gasket would i use on a 95mm bore? the 3.9/4.6 94mm bore ones or is there a 95mm composite gasket?
Posted: Sun Jan 07, 2007 11:59 am
by john 215
Hi,V8 Developments list a 95mm head gasket on there site.
Hope this helps,John
Posted: Sun Jan 07, 2007 12:34 pm
by Wotland
Hi,
You can use Buick 300 head gaskets
who has 3.75'' bore size.
Cheer.
Posted: Sun Jan 07, 2007 8:10 pm
by stevieturbo
Wouldnt the standard gasket still suffice ????
The factory/Payen ones are excellent gaskets.
Posted: Sun Jan 07, 2007 9:17 pm
by Coops
was asking stevie as didnt want to have sealing issues if i used the 94mm 3.9 head gaskets
Posted: Sun Jan 07, 2007 9:21 pm
by toughy V8
but isnt the standard 3.9 gasket actually 95mm?
Posted: Sun Jan 07, 2007 9:23 pm
by stevieturbo
thev8kid wrote:was asking stevie as didnt want to have sealing issues if i used the 94mm 3.9 head gaskets
How do they look on the block ?? are they overlapping the bore badly ?
Posted: Sun Jan 07, 2007 9:31 pm
by Coops
won't know till tuesday mate when i pick the two blocks up