The V8 Owners Forum -

Posted: **Sat Sep 20, 2008 1:30 pm**

hiya all,

Anyone know the inside diameter the LT77 spigot bearing should be.

Think i might have ordered the wrong one...but need to be sure.

one i ordered was 549911 (range rover 4.6) and one i should have got is 614263.

So there must be a difference in inside diameters, but cant measure my input shaft till the engines out.

thanks for the help

scott

Posted: **Sun Sep 21, 2008 3:39 pm**

Posted: **Wed Sep 24, 2008 5:38 pm**

cheers

hmmm more shopping for bits....im fast collecting stuff that is no use to me...lol

scott

Posted: **Wed Sep 24, 2008 6:13 pm**

Hi i'm new
Em i right in thinking that a range rover auto engine will have the place in the end of the crank for a lt77 spigot bearing?

Cheers Adrian

Posted: **Thu Sep 25, 2008 7:49 am**

The crankshafts are the same. The manual version has the phosphor bronze (or whatever) spigot bearing, and I think the auto version has a steel spacer in there, but it might have nothing at all.

Chris.

Posted: **Thu Sep 25, 2008 11:36 am**

Cheers chris