Page 1 of 1
Megasquirt IAC & IAT stuff placement
Posted: Mon Mar 17, 2008 5:56 pm
by kev_the_mole
With the inlet pipe for the IAC and the IAT sensor can I just drill/punch some holes through the baseplate of my K&N??
I know it's probaly not ideal but I'd like to keep the under bonnet look standard(isH)
Cheers,
Ian
Posted: Mon Mar 17, 2008 11:08 pm
by Eliot
Thats pretty much how i done mine.
I tee'd it into the rocker breather pipe, which then attaches to the underside of the pancake filter. I also added another hole underneath the pancake filter for the air temp sender.
pic:
http://www.mez.co.uk/dcam/DSCF0128.JPG
little more at the bottom of:
http://www.mez.co.uk/ms7.html
I dont actually have and idle control valve now anyway, as i need to keep the noise down as much as poss with my moaning neighbor.
Posted: Tue Mar 18, 2008 10:09 am
by kev_the_mole
as i need to keep the noise down as much as poss with my moaning neighbor
It really makes that much difference??
Then what you need is a gear cam drive to add that authentic NASCAR whine to his auditory woes!
