Page 1 of 1
lt77 rebuild
Posted: Tue Feb 19, 2008 9:15 pm
by rod baker
has any one used a rebild kit from ebay with any luck for the lt 77 5 speed
mines crunching 3rd and very slight whine just audible
thanks rod
Posted: Sun Feb 24, 2008 11:34 am
by davemgb
Rod,
Surprised no replies yet!
I have not tried a kit off Ebay but have rebuilt a number of boxes and if the box is crunching into 3rd I would expect the synchro teeth to be damaged so budget for a new third gear. You will also need the shims to set the layshaft and mainshaft endfloats - early 2wd boxes use smaller diamter shims than 4wd which are getting hard to get.
Good luck.
Dave